Hoover Tempo Widepath Upright Vacuum - Blue "hard push" Questions

hard to push on carpet? 1) Brush replaced. 2) New belt. 3) Recently serviced for being hard to push, and it's still hard to push. sometimes the little rubber wheels in front wear out of round and bind

...hard to push? Do you have the height setting correct for the type of carpet? Is it hard if you push it over a wooden or tile floor? Shark vacuums are not hard to push. You must have another problem. ...

...hard to push after installing new filter and cleaning hair off rollers. Wheels move freely and suction cleaning carpet. Vacuum suction a lot better after have done the above. It's very very hard to ...

...hard to push at times, easy at other times. What makes it hard to push and how do I fix it? Nothing. Can't find a way to get to the brush or wheels. Does it have a "brushes" lowering/higher ...

...hard to push. what could be the My oreck is very hard to push. what could be the problem. My oreck XL is only several months old. The more I use it the harader it is to push. I have checked for clogs ...

...hard to push If hard to push, only a few things to check: (1) Rear wheels will get hair or thread wrapped around axles, dust, etc. and be hard to turn. Make sure each wheel turns easily. (2) Small ...

hard to push the vacuum It never was tough to push before the last few months. I had a new belt put on and maintenance done last wk but it's still so hard to push it along the carpet. sounds like it's

...hard to push. Is it because BAG WON'T STAY ON. I have never had such a problem with other vacuums. Need help please. The docking station is not on properly...Make sure that you have the outer ...

...hard to push and then easy to push. In about a four to five foot push it will be easy-hard-easy-hard-easy-hard. Sounds goofy, right? This will repeat no mater what conidtion. It doesn't matter if the ...

Pushes hard over the carpet and left lines in the new carpet. My father pulled it backwards and seemed OK. It just pushes extremely hard forward. The Dyson is about four years old and have not had any