...negitive terminals on the speaker To allow two speakers to be connected in parallel. However, this should only be accomplished by a technician as it can easily overload an amplifier. When two 8 ohm ...
...negitive and what is positive? Normally, the POSITIVE speaker wire will have a white stripe on it. Also you can look on the speaker "lugs" where the wires connect and you should see a + and - next to ...
...negitive on these speakers both have clear insulation on them or does it matter since this is a coil ? what impedance should i get ohms reading when i check ? there is no difference u can connect any ...
connecting the wires to my sub i have a L7 solo baric i think i kno what im doin but there if for stops to hook up the wires 2 on the top positive and negitive and 2 on the bottom same thing. do i run
...I to amp to amp speaker side speaker side connect negitive from sub 1 to positive on sub 2 this makes it 4 ohms and especially with that amp you have it will still kick some hard hitting bass good ...
...cables or one of the subs, the other one pounds as hard as it should. I have unplugged and secured connections of all wires but there is still no change in performance. it is severely depressing.
...car amps are connected with a positive a negitive and a signal wire called the blue line this is the wire that connects to the cars cd player and only turns the amp on when the deck is activated ( ...
...speaker wire). Take one positive pole on the sub and wire it to the negitive pole of the opposite voice coil. Which should leave a positive from one voice coil and a negitive from the other. With a ...
13 questions posted
Usually answered in minutes!
202 Questions
203 Questions
165 Questions
142 Questions
149 Questions
