Microsoft Xbox 360 Wireless Controller "fix 1 wet" Questions

fix a xbox controller that spins after gettin wet hey Brian,, well you can try this.. 1.) remove the battery from it, 2.) remove all the screws so the the control opens up, 3.) use a hair dryer, paper

...fix lets start 1.turn off your box at the wall 2. see the two fans at the back place 2 long long matches (wood) or anything else to stop them spinning 3. turn on box and wait till 2 lights come on ...

...1 hour of cooling try to restart the console and see if you have video For an out of warranty more permanent fix try the xclamp replacement mods outlined in other sections of this forum or search on ...

...fix. It gets the solder holding the detached chip warm enough to make contact but doing it will result in one of two things: 1. It will eventually stop working entirely because heating the system to ...

...every time i try to charge it it just flashes red/orange for 1 second.Please help me try to find a way to fix it.Thanks the battery got wet causing a malfunction everytime it goes into start up ...

...wet is not as bad as one might assume as long as: 1. you dry it out as fast as possible. 2. you quit running electricity through it 3. no transformers or absorbing electronics get wet You always ...

1. I have about 5 ps2 controllers and they all work on my other slim ps2. Is it fixible? trust me, check that there is no dust in the controller slot, blow into it, it worked brilliantly or me!! also,

...1) The game disc has been damaged, or has dirt on the surface making the laser unable to read it. Before continuing any further you should remove the game from the xbox, lightly clean it with a wet ...

...1 yellow light. Is there anything I can do to fix it. Odds are if you dropped you're controller in water and tried to turn it on while it was still wet you fried it and will need to replace it. That ...

...fix it? If it is in the slot 1 or slot 2 on the DS, then personally I would just replace the problem slot. There are very cheap, but do require some delicate soldering. Apart from that, it would ...