...change the belt on dryer CHANGING THE DRIVE BELT 1. Remove the top cover and the rear panel. 2. T720/780: Remove the external fan housing. 3. Remove the special tool. 4. Remove the belt from the belt ...
belt pulley. 6. Install the special tool. 7. T720/780: Replace the external fan housing. 8. Replace the rear panel and top cover. _____________________________________________________ REMOVING THE TOP
...tube and it can be pulled and cleaned also if you desire. 3) With these items out of the way you can now access the pulley for the belt and other items. Have you tried turning the drum by hand if it ...
...change the belt on this dryer? Take a look at this routing diagram.Here is a video to walk you thru the process. You-Tube video "7imwTiRNHY4" placeholder (do not delete) Just did this swap out - the ...
...change? Many thanks for your help. you would need to "punch out the metal" , youl also need to remove the fron tof the unit(2 screws approx 3-4 inches down form inner panel, holding front panel on, ( ...
tube the first thing they come into contact with is the blower wheel. If the blower wheel is not spinning, or if it is missing vanes, it is not moving air efficiently. As a result, heat is not removed
...tube is removed ( cannot be removed without removing rear panel the first time, but if attached a certain way can be done each time after ) and then by pushing the red button in...shown below. i.e. ...
Question about Dryers
...belt and seal so I know everythingelse is ok. Replaced heating and thermostat part Check on thermistor and sircurity switches. and if the PCB is supply the right volt for the heater. also try testing ...
49 questions posted
Usually answered in minutes!
640 Questions
525 Questions
217 Questions
197 Questions
121 Questions