...good. If not, the thermal fuse may be blown or the ignitor itself and thus the reason for no heat. Catriver. i had the same problem, and found you can use 10 amp auto fuse for a temporary fix. heat ...
...remove a back panel to do so. I removed all bolts a screws but don see a way to remove the panel. Catriver was right on the mark. Took a little bit of doing but I was able to fix the problem myself ...
Question about Kenmore Dryers
...Not really a hard job to do. Post a model number (inside door) and we'll get you a part number...Catriver..post back. catriver, Thanks for the advice....the model number is 110.64972300, serial ...
...the bulk head, behind the drum. On a series 11 they moved it to a bracket on the heater cone.
...swing. It's not really a fun job so you want to make sure to allow yourself some time. Email me at catriver[email protected] and I'll e-mail you the instructions. Catriver..post
...for over 25 years and I haven't seen one yet that doesn't catch lint when operating normally., ...Catriver...post
...at it. It will be the white fuse located right above the fixed thermostat. Two wires going to it.
...get water in your vent hose. If you are vented to the roof, have someone check the screen up there. Catriver...post ...
kenmore gas dryer drum rotates but no heat. lint collecter & exaust hose is clean kuki, on a gas dryer, if the thermal fuse is blown, it will rotate but will not heat. If your dryer front has a lower ...
...dryer (GE DPSR475EWOWW)and I removed the drum as explained in the June 23 note between poorman1 & catriver. I found the noise by spinning the fan from its motor and it was dragging against the
143 questions posted
Usually answered in minutes!
640 Questions
525 Questions
217 Questions
197 Questions
96 Questions
