Question about Frigidaire Heating & Cooling
...install 3 N 1 hard start kit. But most likely compressor is weak, be prepared to replace compressor soon. Here is my situation on this compressor - everything was running, but compressor. I check for ...
phase, you need part number HN51KC024 for your contactor and the Dual Capacitor is P291-4054RS. Your unit may have 3 more numbers on the manufacturers plate that will be required to verify these parts
...3 mins. for it to kick on, however after a hour or so its sitll not cooling, Any ideas what to check for? Thank You. Check the thermostat, does it open and close (electrically)? In the past three ...
...install in series with your run capacitor that sometimes will break free a stuck compressor or a tight one. You should also look at your capacitor to see if it is swollen, leaking oil, burned ...
...capacitor was bulged and leaking. Went to my HVAC supply warehouse and got a new one and added 1lb of refrigerant (which it needed). The unit ran great for 3 weeks. On Saturday afternoon when I came ...
Question about Goodman Heating & Cooling
3). Mark and record the wire locations. The capacitor will have a part number and will be marked either 370VAC or 440 VAC and will have a rating in microfarads. Bring the capacitor to an electrical or
...3 ton. The air handler works fine. I thought it was the capacitor. The old one was bad,I verified that with multimeter. Ordered a new one (original replacement part). Installed it tonight, turned on ...
...capacitor by connecting the probes to the fan and common terminal. 3 Turn on the multimeter and read the display screen. You will see two readings, one for the condenser fan and the other for the ...
2 questions posted
Usually answered in minutes!
90 Questions
61 Questions
42 Questions
37 Questions
47 Questions