Question about Sewing Machines
...Remove the top thread from the machine. ALWAYS RAISE the presser foot and rethread from the beginning. Verify the thread path is correct. Verify the bobbin is loaded and threaded correctly in the ...
...thread. Replaced bobbin and now it is getting caught. I have remove & replaced it several times & dusted out bobbin holder. When I was winding the bobbin I forgot to disengage the needle. ...
Question about Sewing Machines
...thread hangs up under the plate and will not bring the bobbin thread to the top. Any suggestions to remedy this problem? Hello The description seems to indicate that the top thread has no to very ...
Question about PfaFF Sewing Machines
...remove thread jam under the stitch plate. I have cleared everything several times but it keeps coming up on the screen. Candace, while not familiar with the 4.2, I've had thread jams on my trusty old ...
Question about Brother Sewing Machines
...thread please follow the instruction 1. raise needle to its hieghest position 2. remove hand hole cover plate 3. remove bobbin case from shuttle, pull open latch of bobbin case 4. pull bobbin case ...
Question about Sewing Machines
...remove the throat plate and loosen the screws that hold the bobbin mechanism in place so I can get to the tension screw? the tension screw for the bobbin thread is on the side of the bobbin carrier ...
...remove that plate and get all that thread out. It did not work. The plate still does not come off and the screw that holds the bobbin rewind stop does not tighten back down. I heard something fall ...
Question about Sewing Machines
...Thread Catching Under face plate (catching on position finger) I was quilting and my thread kept breaking. I removed the face plate and removed lint from the bobbin case, feed dogs, and surrounding ...
remove thread under needle plate and bobbin area Remove the needle plate, bobbin case, and anything else that can be easily removed and gently clip thread with scissors and remove thread with tweezers
Question about Husqvarna Sewing Machines
thread *remove and rethread the top thread * check that the stabilizer is of sufficient weight for the density of the design. (You may need to float an extra piece of stabilizer underneath the hoop) *
32 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions