Xerox Phaser 6360DN Printer "grinding" Questions

Xerox 6360dn, Tray 2 makes loud grinding noise when printing. Tray 1 is as quiet as a mouse. Replaced tray 2 with a known good tray and it still makes grinding noise. In my experience, it was the ...

...replace the auger shaft assembly but if you can find the magnet, you can super glue it back on. The grinding noise is caused by a worn or bad gear in the drum unit. (if you are refilling the toner ...

paper jams at front feed. noisy when starting. grinding noise could have spilled ink on a move as it only cooled for 10 minutes. Run remove ink smears. Clean pick an feed rollers with packing tape.

07,010.43:130907 we installed a maintenance kit now printer makes grinding noise then errors Hi Anonymous, Please go to your Xerox concessionaire for advice. Regards.

...the following code: 07,010.43:41982 While it goes through it's system checks a few gears are grinding / jammed. There are alignment motors that rotate the heads do go bad and cause that code ...

The printer is making a grinding noise and printing blank pages. I checked all ink cartridges and the imaging panel was replaced about a month ago. I checked everything and it still doing the same ...

we have a squealing sourt grinding noise when printing. pls do following steps 1,take one painting brush 2,remove the screw from the printer 3,check indie any paper is there or not 4,remove all papers

My 7300DN starts making a grinding/ratchety noise shortly after power-on. It sounds as if it's coming from the upper right side. I swapped out the transfer unit but got the same noise. Any suggestions

Gear grinding We had a paper jam which I think misaligned the gears causing them to grind. How can I realign? Sounds like your Process Drive Assembly has broken its mounting posts and the gears are no