Kodak Easyshare Printer G600 Thermo Printer "not paper" Questions

...paper. And so on. I take cartridge out, replace. Nothing helps. Maybe I'm not getting the stupid cartridge seated but if not, I'm not sure how to do it. try to make sure that the paper is printer ...

...PAPER WILL NOT PICKUP, PAPER MAY JAM ALOT, PAPER PRINT QUILITY MAYBE BE POOR, INK MAY MEER, TOMERS ARE SOME OF THE PROBLEM TO ALONG WITH PAPER ISSUES ALSO, YOU MAY HAVE TO USE A THICKER OR THINNER ...

...the input tray, but not so tightly that it bends the paper. Insure the stack of paper does not extend Ã? Observe the printer during operation. Promptly remove printed pages from the output

...paper is not made for inkjets. The ink will simply spill all over the place. 2. You can use any paper you wish that is inkjet paper but you must set the appropriate settings through the print manager ...

...see any paper stuck in there or not........if still no paper restart the printer after 30 seconds and check if still getting paper jam or not............if yes then contact Kodak tech

3) the paper surface bright and the roller worn could be cause paper feed fail, you need clean the roller anyway. still not fixed, you need to adjust the roller pressure by increase the spring force.

...Paper does not reach the sensor in the time allotted. A simple test is to put a mark on the next page that should be pulled from the paper tray. If the paper is pulled from the tray, you will find it ...

not solve this. Thank you sincerly, Stephen The paper size must be set to borderless in both the application (MS Word) and the printer driver. To set borderless printing in the application, follow the

...not overload the paper tray. Load a maximum of 100 sheets of plain paper, or 30 sheets of photo paper, into the paper tray. 2. Do not load more than one type of paper into the paper tray. 7. Load ...

...not paper. The tray is on correctly. Use standard office paper; folded paper, paper with labels, and specialty paper such as hard bound paper so that paper is detected by printer. If you're uncertain ...