...about 2 min. When the printer is back at the ready screen it has been reset. Warning:it will reset EVERYTHING, including your serial number and everything else that matters. Thanks for using
...serial number and page counts). NOTE Before performing a cold reset, print a menu map and a configuration page. Use the information on the configuration page to reset any customer-set device ...
...the buttons. Wait for about 2 min. When the printer is back at the ready screen it has been reset. Warning:it will reset EVERYTHING, including your serial number and everything else that
serial number on these units cannot be adjusted or overwritten. You are stuck with the zero count if you installed a new formatter, or the page count on the formatter if you installed a used one. Just
Question about HP LaserJet Office Equipment & Supplies
...number of causes. Sometimes, a corrupt file, or pdl string from certain applications can cause this. It could be something on the formatter. You could try to take out any added EIO cards, hard disks, ...
serial number and the page counts. NOTE: Before performing a cold reset, print a menu map and a configuration page. Use the information on these pages to reset customer-specific settings. CAUTION: All
...serial number and the page counts. NOTE Before performing a cold reset, print a menu map and a configuration page. See Information pages. Use the information on these pages to reset customer-specific ...
Question about HP LaserJet Office Equipment & Supplies
...serial number and date and hour of print. these information could be decoded from the repated matrix of yellow dots print along all the single paper... This sounds like the fuser is either bad or ...
Question about HP LaserJet Office Equipment & Supplies
...serial number, the model number, the event log, the page counts, and the EIO card. Use the SERVICE menu to restore the serial number and page counts. You also need to reconfigure any computers that ...
serial number, the event log, the page counts, andthe EIO card (initializing the NVRAM resets SERVICEmenu values to factory defaults). Use theservice menu to restore the serial number and page counts.
402 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions