Brother HL 2140 Laser Printer "switch blinks starts" Questions

Starts to print and then stops. All four lights begin blinking. Have switched drums and toners, but same thing happens. Wot is d name of the copier??????

...jam.then restart the printer. shut off printer then open front cover , press go and hold follow switch on until ready led off . release go button press go twice wait 3 sec then press go 5 times ...

...starts but the red alarm light goes on, not blinking, and no copies come out of the printer. tray this The procedure for the factory inspection mode is as follows. (1) Turn off the printer power ...

...diagnoses mode, then by process of alimination opened and closed each panel and cheack each sensor switch one at a time. At which time it was apparent the problem was the rear door sensor. So I ...

...open drum release. The master feed blinks and I keep rechecking it. Friend,this code refers to switches cover: can cover the trash (disposal box) that has two switches, magazine master.Tente ...

...switch light if blinking. power light blinking slow - printer is out of paper. power light blinking fast - there is paper jam in paper. once, pauses and blinks again - raise the scanner unit, and ...

...Blinks lights on start but fails to power Changed cables .all we get is a blink once .it wont blink lights on pressing stsrt button again ..switch on and off at wall you get another blink. Your ...

HP PSC 1410 I have a HP PSC 1410 printer. All of a sudden in the morning when i turned on the printer all the lights on the printer started blinking and keeps blinking. E appears on the copies LED. ...

...starts calibration, then all lights start flashing. When double pressing go button: (go) and ! and %\/ lights start flashing. When double pressing (go) button again : (ready) and ! lights start ...

...press and hold the 1, the Stop, and the Power Save buttons on the Control Panel while switching on the power. Hold the buttons down until the boot up screen (5 circles) appears and the ...