Cisco Catalyst 3750E-48PD "vlan routing" Questions

routing dhcp packets across a diffrent vlan, The switch connected to dhcp server(vlan 8 ) is cisco 3750 and the host is connected into vlan 2, Hosts in vlan 8 can get dhcp address, but not the ones in

...routing two vlan on a 4500 switch. I thought it was like on cisco switchs "ip routing", but in 3com does not exist this command. i can't set ip address over 4 vlans. the 3com switch 4500 always give ...

...Vlan routing I have 1 DLINK Layer 3 switch and 2 Dlink Layer switch model No. are mentioned below. The problem is i am not able to perform inter Vlan routing.I have created 2 Vlans on Layer 2 swtich ...

Netgear FSM7352S - VLAN not connecting Netgear FSM7352S - I have configured VLAN 4 on port 48 (untagged) and 52 (tagged) with the aim of using these two ports to connect a device on Port 48 across my ...

3 vlans, data,1; data 2,;voip,5. Ports carry voice tagged, and data. currently Windows 2000 DHCP server lives on Vlan 1 (AND WORKS). Need to upgrade. When we test the new servers we are unable to make

...routing
Hot Standby Router Protocol (HSRP)
Protocol Independent Multicast PIM (Sparse Mode, Dense Mode, Sparse Dense Mode, Source Specific Multicast) stub
Virtual Router Redundancy ...

...routing timesync sntp snmp-server community "public" Unrestricted vlan 1 name "Data" untagged 1-46 ip address 192.168.105.11 255.255.255.0 ip helper-address 10.50.3.2 tagged 49-50 no untagged 47-48 ...

...vlan 1 with a bootp/dhcp address, I assume you will need to perform some kind of routing ie; default gateway, ip-helper address or static route to point to your routing device ADSL router etc try the ...

vlan routing on cisco switches and router earlier so configuration is not a problem its just that i cant get linksys switch configured correctly. Please help. Make sure that the frame encapsulation is

... there will not be an answer). Then log as superuser (#) and do this: 1. Type set interface inband <vlan> Replacing <vlan>, and with the VLAN, IP address ...