Dell 1200MP DLP Projector "screen down far" Questions

screen. Used the zoom button, but that does not bring it far enough down to size. HELP! Is the projector permanently mounted or can you move the projector closer to fit your screen. This should do the

down.... i need this to be on my screen that is on the wall obviously and i am so frustrated because no one has been able to help me so far!!! Please help me!!! I don't know that particular model, but

...screen Most likely your DMD chip has dust or hair on it. You can try blowing it out with compressed air but the best thing is to tear down and clean the dmd chip itself. Very carefully. Here is a ...

screen goes blank, and the red light flashed every 1 second (the manual says this is an internal fault) has anyone got any ideas what the fault is ? is it going to cost me an arm and a leg to repair ?

...down as far as the lamp hours option in the on screen menu so I can't re-set it as per previous posting - it just skips back up to the top of the list to "Language" etc etc. Any other ideas? Try the ...

...screen You need to configure your video card. I'm assuming this is a laptop you are working with. Go into the video card properties, and make sure the VGA port that drives the projector is not set to ...

...screen in my classroom as well as continuing to see the information on my destktop monitor. Are there any certain cords i need and if so can you send me a link so i can see as to which kind they are ...

...down a tooth pic. I can help you solve this, but need more specifics. thanks you might need a new bulb depending on how many hours its been used, if over 2000, then yes. But 200 feet away from the ...

screen then you need to to go into the manual settings and adjust the settings. Now i want you to goto this website: http://www.aboutprojectors.com/pdf/sanyo-plc-xu73-manual.pdf This is the manual for

...screen that was pulled out to far. It is a wall mounted one. It will not retract This could be one of two things. 1. The coil spring in the housing is wound so tight it wont release the pawls and ...