Question about SIM2 Office Equipment & Supplies
Projector is brand new out of the box. Powers up displays Sim2 logo then lamp goes out power light starts to flash and turns off about 3 minutes later. Same thing every time it's turned on. Anyone had
Question about InFocus Office Equipment & Supplies
Lamp - blinking red - is not so good For dual-lamp projectors, one blink off every 2 seconds means the problem is with lamp #1; two blinks off every 2 seconds means the problem is with lamp #2. So how
...blinking red, power button orange nec vt700 HelloLook at the number of blinks of the status light.[1] If it blinks at one cycle (0.5seconds On and 2.5seconds OFF) : Lamp cover error or lamp ...
Question about IBM Office Equipment & Supplies
HI I WANT SERVICE CODE OF INFOCUS LP600 ASKC175 HI I WANT SERVICE CODE OF INFOCUS LP600 ASKC175 I am not exactly sure what service code you are searching for, what is happening with the projector? You
my lamp light stays on my status blinks if it's blinking red, how many times? 1 time- lamp cover. 2 times- overheating. 4- fans. 6- lamp. if the lamp led is lit red, replace the lamp.
...lamp lit. It could also be the power supply that feeds the ballast. If it is actually continually blinking, it could still be one of those componets. If there's a warranty, call the vendor for ...
One blink led - PJ won't work Hi I having problems with my 4805. Was enjoying a movie, when the lamp suddenly shut down. After that nothing. When I turn it on I can see that the lamp shortly lights up
...with a new replacement, however, when it is turned on there is still a blinking red light and the lamp won't turn on. replce lamp ballast board of your projector... reset lamp timer check your ...
Question about Sony Office Equipment & Supplies
Sony VPL-CX61 lamp/cover blink. Power on, it Sony VPL-CX61 lamp/cover blink. Power on, it works. After about 10-20 seconds, it does not work, and lamp/cover led blink. hi, your projectors lamp cover ...
Question about Mitsubishi Office Equipment & Supplies
...Lamp was shattered. I replaced it. After plug-in; ready normal but immediately after sw on (< 1 Sec) cuts out and the PowerLed Blinking Red/Gn, Status Blinking Red, Pwr Sw out of action and will ...
31 questions posted
Usually answered in minutes!
94 Questions
59 Questions
55 Questions
35 Questions
28 Questions