NEC VT595 LCD Projector "repair failed fan" Questions

...feel stiff or rough when you rotate the blades gently by hand. If it's not a faulty fan, you are in for a rather expensive repair.... The bearing cannot be repaired - the faulty fan must be ...

...failed and the projector automatically shuts down. Please advise? Well this is actually an error message that indicates that either the fan is actually failing or the temperature sensor, and or ...

...of issues. It is also possible that the fans have failed. Feel free to contact me at [email protected] if you would like to hav e a technician take a look. Projector Repair Bulb ...

...fan thing right now but does anyone know somewhere to send these things for repair? Anyone know if they can be sent back to Cinego for repair? Have any comtact info? Steve @ [email protected] I ...

...failed. Do not run the projector until it is repaired as this condition rapidly destroys the lamp!! If the cause of the problem is simply the fan itself. It can quite easily be acquired and replaced ...

...Failed sensor There are two types: temperature and airflow. To fix either of these, or anything else, requires opening the projector. Unless you are a qualified electronic service technician ...

...failed, and the machine again shuts itself down (without warning), but now it turns off after only a few minutes of play time. The lamp currently has 507 hours. I have adjusted various settings to ...

the projector will turn on and after a few minutes it turns off. Either the lamp is bad or one of the fans is failing or failed. The latter will have to be repaired by a technician.

...failed. I reckon it will be the fan neaest the lamp. Clean the air ways and repair or replace the fan. These fans have a sender unit that tells the processor when they are not rotating. Take great ...