Hitachi CP-X505 Projector "cancel time" Questions

...a dialog. To reset the lamp time, select the RESET using the ? button. RESET ? CANCEL • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the

...displays a dialog. To reset the filter time, select the RESET using the UP arrow button RESET and ...

...TIME menu. Select the RESET using button to reset the timer. : RESET <- CANCEL Selecting the RESET resets the count of the lamp timer to 0. memo Perform this function only when you have cleaned or ...

...time which stubbornly remains on "cancel" can you please advise? unplug projector for about an hour, and then remove bulb, and filter, inspect areas for damage, also inspect it to make sure your ...

...to cancel the "LAMP RUNTIME" screen) Press the POWER button to turn off the power. The POWER button on the projector illuminates red. This will reset the cumulative usage time for the lamp unit to

0h" but that option isn?t available. I went thru advanced menu -got to filter options- filter reset/cancel but when you try to hit the reset it again will just flip mirror screen image to upside down.

...time, pleas input "ENTER" four times.To cancel the security lock, press the Menu key, then turn OFF the "Security Lock" setting on the INSTALL SETTING menu.If you call the customer service center ...

...time you turn on the projector. If you enter the wrong password, the password error message displays. You can retry by turning off the projector (by pressing Power and start again, or if you did not ...

...for 3 seconds. After doing so, "Lamp Runtime" will change to "Time Reset {Power Off}" now turn off power. (Dont hit menu or enter as it will cancel this procedure...just power off. Hope this

... Note:  If the 'menu' button is pressed the lamp time resetting screen will be cancelled.[5]  Hold down the 'power' buttonfor at least [0.5] seconds or press the