Phantom Power Not working through K6 Hello. My sennheiser k6 power unit works fine with a battery, but won't conduct phantom power through it. I've tried different XLRs, made sure my ME66 works on a ...
phantom power supply, and the phantom power LED is on. The phantom power is then connected via XLR to a Lexicon Alpha interface. From there, all I can hear is buzzing when the mic is connected, and it
Question about AKG Audio Players & Recorders
...Phantom power unit at the end of my AKG C747? Hi,the switch for the phantom power on the microphone is to activation of the mic.Without the phantom being activated, the mic will not work. It can only ...
Question about Sanken Audio Players & Recorders
...phantom power ....i connected them and switch48v without any signals ....... if you have a volt meter check the supply is working correctly 48v dc phantom power should be found between these pins on ...
phantom power on the microphone is to be activated .Without the phantom being activated, the mic will not work. It can only be activated with a mixer console that has a phantom activation on it. After
...phantom power to work. So the phantom switch should be on. When you turn phantom power on you usually hear a bump sound (through the amplifier). In this case, nothing is broken. Your picture is of a ...
Question about Samson Audio Players & Recorders
...when i put another mic in it just works fine You Samson microphone requires phantom power to operate. PC's don't have phantom power. You need to run your mic thru a mixer that has phantom
...phantom power was not available. So looking at the Beta 98h/c, the microphone cable ends in a Male XLR at the end of the phantom assembly. So I figured I would need to buy a female XLR-Female mini ...
Question about Shure Audio Players & Recorders
...respond when I plug it into my laptop or PA. It won't work. The SM87 requires phantom power. Plug it into a mixer that has phantom power and make certain the phantom power is turned ON on the
Question about Sennheiser Audio Players & Recorders
...phantom power turned on, this unit produces major static on the channel; as soon as the phantom power is turned off, the signal is clear and the receiver works fine. All of my other receivers work ...
24 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: