Samson C01U - USB Studio Condenser Microphone Consumer Microphone "not recording" Questions

...not play anything back and the instruction manual includes NOTHING on playback except to hit STOP when we're through recording, back up to the start and hit PLAY. The only song that will play back is ...

...you record because once it freezes up and says not stopped you can only unplug and plug back in then turn power on. You will lose what you were recording but nothing will be lost that you have

...recording in stereo is not practical. Stereo inputs are left and right (two inputs). Whatever your recording setup or audio workstation, the track you record to from your microphone needs to

...is driving me nuts PLEASE HELP!!!!!!! The monitoring switch should not affect the recording at all. Maybe you have a defective mic? Does it record from the line input if you set it to Line In

...you are basically try to master Nothing 0.0-0.0secs. So Set your In at the start, and Set your Out at the end of the recording. You must do this. Do not touch the Out until your recording is

...not have a built in microphone. There are some very cheap external mics on the market that sound very good. If you are doing any serius recording you may want to invest in a USB microphone. The USB ...

...not record stereo anymore. when playing back a stereo works fine but when recording in stereomodus only the left channel records, the right channel seems to record silence/noise This Mic is not a ...

...recording, and the VU jumps when it's not playing, but does nothing when the track is playing back or recording. I have the bass assigned to track 8 and the track is armed. What's going on? I shut ...

...recording level control is not at zero on the hifi and if there is a volume control for line-out on the tascam. If you are able to listen to the recording on via the hifi then you are halfway there ...

recording steps first. First off make sure your Hi-Z input is not set to the Hi-Z or guitar setting. It is possible your that MicroKorg is overloading the input and distorting. You should however have