Samson C01U - USB Studio Condenser Microphone Consumer Microphone "audio mic problems" Questions

audio buddy dual mic preamp Hi- I have a m-audio dual preamp; what is the best way to set up with 2 dynamic mics and a boss br1180 studio? Thanks! Albion ive got a problem cuz this thing doesnt have a

...Audio preamp and condenser mic The problem is that I cannot record. I have an Dell Lattitute Laptop connected to my M-Audio Mobile PreUSB preamp via USB. The mic is connected to the preamp via a ...

...mic and the m audio mobile pre 2nd gen. audio interface. yesterday the mic was working fine with no problems but today for some reason i have to really yell loud into the mic to get sound to the ...

...Audio-Technica ATM410 plugged into an HP Media Center PC and can't get any volume. Zero volume if plugged into Mic input in front of machine. Extremely low volume if plugged into Mic input in rear of ...

...mic preamplifier box, like an M-Audio product, which will provide phantom power, xlr/1/4 inch inputs and USB output. hey i have a problem with c-1 as well, like a week a go it was working normal with ...

...mic works but the voice quality is like someone singing under water, really garbled. Can you tell me what is wrong with these two mics? Thanks, Dennis Contact Audio Technica. They might need to be ...

to mind..If you have ruled all these things out,then it could be the capsule or loose joint or component in the mic which means contact AKG,pro audio services or find a DIY mic person to help..G luck!

...audio Buddy connected to a Peavey 200 ohm amp. I cannot increase the gain on the preamp or the amp without tremendous feedback Hey I Have These Mics They Work Awesome. But Yes Feedback Is A Problem ...

...mic and the audio signal LED on receiver lights everything is ok.First check your receiver to amplifier jacks and cables,If ok check muting transistor inside the receiver next to the audio output ...

My mic wireless mic sounds like it has a ground loop hum when it is in standy mode and when it is all the way on. I've switched cables and batteries what could be causing this hum? You could ...