Question about Samson Audio Players & Recorders
...Audio Codec Hi - I connected my Samson G-track to my USB and Vista Ultimate 64-bit is needing to install the USB Audio Codec. However, Vista cannot find the codec. How do I get it to work? If the LED ...
...mic can't be used with the m box, it can be used as a source in your audio software however. When you assign your audio sources look for USB Codec in the choices. I have a USB mic and it works ...
...computer and check on audio and sound devices, is it already set to USB audio CODEC for the default device? did you follow the setup guide or check it? click here for the manual. update us ok? ...
...Audio Codec" or "USB Audio Microphone" as the input device. In Vista, right click on the speaker icon in the taskbar (usually lower right hand corner of the screen) and select "Recording Devices". ...
...Audio Codec IS the default recording device. Just after selecting it as default device XP will NOT let me change the recording volume. I thought the device must therefore have its own control panel. ...
...Audio CODEC) This assumes you have gone to Garageband preferences and changed the Audio/Midi settings for audio input to USB Audio CODEC which appears when you plug in the G-Track Mike Don't worry ...
Question about Samson Audio Players & Recorders
...audio codec has no volume controls and it will not allow me to highlight the usb device for recording. im using xp 64 Hey same problem here, mine is also not enabled the volumen controls on control ...
...and select sound. There you will find an output and input selection. You may want to go to output and select the inbuilt speakers rather than the USB Audio CODEC. Hope this helps all! ;) ...
Question about Samson Audio Players & Recorders
Audio CODEC device Click Properties Go to the Levels tab, there will be a slider that says Microphone. Right-click on the number. Select decibels. Adjust the slider until it reads as close as possible
Question about Audio Players & Recorders
...Audio Codec, select Properties, click Advanced tab, select 2 Channel 16 bit 44100Hz and then hit apply. You have to make sure you have the 2 channel option selected. otherwise the computer just ...
50 questions posted
Usually answered in minutes!
86 Questions
43 Questions
23 Questions
17 Questions
17 Questions