MTX Thunder 81000D Car Audio Amplifier "wire 2 jl w7" Questions

...2.41 Ohms when the coils are in series. Each 13 connceted to each amp with voice coils in series is your best bet. The amps are designed to put out the same amount of power from 1.5 to 4 Ohms. If you ...

...wire the subs @ 2 ohms and you would be right about nominal power handling for the W7 which is rated @ 1000W, and your amp would push about 1100W to it. just be carefull when adjusting. and the best ...

...Jl and they want me to send it in for $180.00 but I dont think that anything is honestly wrong with it, it doesnt smell burnt. I have opened it up inside and no fuses are visible to be replaced and ...

...jl 1000/1 amp, 2 farad cap and zero gauge wiring hooked up to a w7, and when i turn the bass or volume up it cuts off and i notice the "low V" light come on. do i need a second battery? or just a ...

...JL Audio W7 Woofer. What can be Wrong? Check the wires going to the amp for any corrosion on the terminals and ground. . Kind of like when someone squeezes a garden hose when your trying to use it. ...

2 speakers are a different way... this is parallel :pos to pos , neg to neg, then one wire coming from pos on sub to pos on amp then neg on sub to neg on amp but bridge the amp on your amp should be 2

...wire, optima 31 series battery, and the amp had been repaired 2 times already with the same thing happening every time. The day it blew it wasnt turned up the outputs of the amp turned in to current ...