MTX Thunder 81000D Car Audio Amplifier "fix blown speaker" Questions

blown somewhere. Could be a simple soldering fix or more complex. If it's under warranty get it replaced. If not then depending on the cost of them amp would depend on fixing it or replacing it. try a

...comes on then the amp is blown. If the amp is blown you can send it to people on ebay and get it fixed pretty cheap. Good

...4ch amp pb1617x goes right to protect mode when turned on wires are good fuses are good to. how do i fix it pull out 1 rca jack at a time and try it..usually speaker wires touching...or blown ...

...speaker blown or just loose wiring or is there other problems that could have happened? Lets narrow it down. You've go two speakers, one works, one doesn't. First off, switch the connections on the ...

blown voice coils. do not leave the voltage on it for more than 1/2 second,as the dc can burn out the speakers coils id say get a test speaker and run the amp on very low output, just see if you get a

...fix it? my protect light came on my amp (Infinity Reference Series 1600A), what are all the causes of this? Check your wiring to make sure non of the wires are touching ground. If one or more of your ...

...fix the amp without taking it to someone? you may have already blown the amp...if it is doing this with no speakers hooked up to it trace your power and negative line to ensure there are no breaks or ...

...all the fuses and none of them were blown. The ground is good too. I have even tried only wiring one sub to it...i think its in a protective mood. Is there a way to fix this? The outputs sound ...

...speaker all I get is static. Can it be fixed? Maybe, but you would need to take it to a stereo repair shop. If a wire is burned out or a small component is blown, it can potentially be replaced. May ...

...speaker wire the bolt that hooks the ground wire into the battery is stripped it could be intermitting power to the amp but the amp is still getting power just not sending any and none of the fuses ...