press TONE again. This will reset the controls and PROBLEM SOLVED. * the last couple steps need to be done fast, otherwise the AMP ERR will override the reset and you will have to start all back over
Question about Pioneer Audio Players & Recorders
...RESET  NO . 3 Press ENTER on the front panel. 4 Select 'RESET' using /, then press ENTER on the front panel. The display shows RESET? OK. 5 Press ENTER ...
Question about Onkyo Audio Players & Recorders
...reset my amp / receiver from protect mode ? if your receiver is in protect mode then that is one of two things. one there may be a power short some were in the power setup that needs to be fixed ...
...reset. If the amp goes in to protection again then it is an indication that there are either shorted speaker outputs inside the unit. Unplug the unit from AC power for 30 minutes, and disconnect all ...
Question about Yamaha Audio Players & Recorders
Should I reset the amp? It's not in the Manuel Have you checked to make sure the TV connection is from the correct TV output? The TV is not on mute? Recheck all connections. The amp obviously works ok
...reset jvc tv Questions & Answers - Fixya www.fixya.com > Forum > Tags ... reset jvc tv question. Get free help, tips & support from top experts on reset jvc tvrelated issues. ... one on the ...
...my brother who doesn't have a good amp First I would try to reset it. With it off, hold the power button for about 5-10 seconds. It should either reset, or tell you to press enter to reset
...Amp Err? usually means some DC in the output. Disconnect all the speakers and turn on the unit; if it acts normal, reconnect speakers one set at a time very carefully. If the unit still shows the ...
...amp for your rear speakers, this indicates that in your setup menu you probably have deleted the rears (set to None). Try to find the settings for your rear speaker in your setupmenu and see if they ...
Question about Onkyo Audio Players & Recorders
amp has gone into autoprotect mode. How do I reset it now that I have checked and fixed all the speaker connections? if you want to resolve the issue yourself, try resetting it to it factory defaults.
105 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
76 Questions