...cable from sub to tape in/or out on avr (depends on AVR) LFE connection the sub turns up with the AVR - the stereo cable threw tape in/out on AVR only turns up via its own onboard amp volume from AVR ...
...sub cable to the amps sub OUTPUT then to the sub input turn the volume up half way on the sub then go to the amp setup menu and make sure the sub is switched on then set the cross over to suit your ...
Question about Technics Audio Players & Recorders
.../ output (single cable) sub might be a car one?? Yes, if it only has speaker-level inputs it would require an amplifier to properly drive it. Name the sub and maybe we can answer the second
sub cables due to the weight of the cable hanging on the socket many a times the RCA sub socket pin breaks inside. You will have to get it replaced. Getting to it one has to be careful and experienced
Question about JVC Audio Players & Recorders
...sub cable to a spare working speaker out rca and sub works all ok but obviously wrong frequency so no real bass so proved cable and proved actual subwoofer are o.k. Help Check the setting on the ...
cable and the sub woofer doesn't have a pin cable but straight wires.....what do I need to do from here sell the bose sub, buy a nicer yamaha sub, enjoy the 200 bucks you have even after you buy a new
cable but no result. at receiver sub is turned on and vol is turned up. Am I missing something in the setup, is it the sub or receiver not switching? I'm stumped! I felt supid this morning. I bought a
...sub attached - RCA or speaker-level? Disconnect the input(s) and see if it hums in the absence of an audio source. A bad audio cable shield or unwisely-routed audio cables will allow entrance of ...
...cable or the sub must be the culprit. 1st try a different cable, they do go bad. If problem persists, test the sub with another receiver or take back to store and have them test it. After that, the ...
64 questions posted
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions
