Samsung SpinPoint T HD501LJ 500 GB SATA Hard Drive "seagate hard drive jumper settings" Questions

...hard drive Hi, Follow these links JUMPER SETTING ...

...drive is the Seagate Baracuda series, then simply remove all the jumpers from 8-pin jumper block and it will be a Slave drive. If you want any other settings, the jumper settings are described

hard drive settings need jumpersettingss Jumper settings for Seagate ATA/IDE Internal drives <20gb & greater For older/smaller drives visit www.seagate.com that is right i had the same prob but as ...

...seagate U6 Model ST320410A Hard drive. I have two Identical hard drives and I want to set one as a master and one as a slave. Jumper settings can be found here: ...

Seagate 73 GB model of Hard drive.It has 12 pins at the back of Hard drive. You need a jumper on ID pin sets 1 and 2 (as if you were setting it for both ID 1 and ID 2) These pin sets work like binary,

...Seagate 80GB drive connected as slave. New WD1600AAJB as master - works fine alone. I want to use Seagate 80GB as slave. Won't go. Computer stalls on start up. Both drives listed on start but XP Home ...

hard drive,,model 91362u3,,13 gb,,want to make slave out of it no jumpers = slave FAQ here http://seagate.custhelp.com/cgi-bin/seagate.cfg/php/enduser/std_adp.php?p_faqid=341&p_created=985649154 http:

...hard drive Jumper settings for Seagate and Maxtor IDE (ATA) harddrives, http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=196299&NewLang=en Follow the chart examples under the ...

...seagate.com/staticfiles/maxtor/en_us/documentation/manuals/dm_plus_60_ultra_ata_manual.pdf The Jumper Settings are in Chapter 2, Page 5 (2-5) Looking at the page number for the PDF file it's on Page ...

which is the correct jumper settings on Seagate Barracuda ATA IV 80 GB Hard Drive Hello Please see the image below for correct jumper setting Hope this helps, if so do rate the solution