Frigidaire FEX831CS Top Load Stacked Washer/Dryer "fix loose dryer belt" Questions

...fix the dryer belt of a Washing Machines to get rid of loud noises. Instructions And Things You'll Needed to solve the problem. Screwdriver ,Replacement Washing Machines belt 1 Stop the Washing ...

...fix. Assuming this is a free standing dryer and not a stack set, take the lint trap out on top, then remove the two screws that are located there. then get youa flat head screw driver and slidein ...

dryer won't spin. To fix this issue, turn the drum by hand. A working belt should provide some resistance, so if the drum turns very easily and loosely, the belt is probably broken.https://www.youtube

...loose and will therefore not spin...HHHHEEEELLLLLPPPPP!!! Thanks Carl in London you do not tell me alot about the problem,so im going to hazard a guess; get your drum belt tightened or replaced this ...

...loose. Switch off at the plug first. Easy enough fix with some basic tools and a bit of time. Buy the belt off ebay when you are sure that is the problem. Vac all the fluff out of the machine while ...

...fix once I realized where the belt went. I made the mistake of opening the front cover of the washer first, which is why I did not see where to put the belt. Apparently, if the washer is not level ...

...loose. Tighten the bolts on the spider to silence the noise it causes. Check for coins. If the noise the washing machine makes sounds like metal on metal, there is a good chance that some change has ...

...it moves by itself without moving the drum. What can I do to fix this problem so I can wash clothes again? Remove the front panel of the washer and check for a loose or broken drive belt at the

loose motor fixings. Finally, remove drum belt, and spin drum by hand, tjhere should be noise from bearings, if it feels rough or is rumbling , then main bearings have failed. Please rate my comments.