Frigidaire GLTR1670A Front Load Washer "remove bobbi pin wash machine" Questions

...pin. when machine is on spin cycle only the pump opperates. does not spin at all. please help If there is no water in washer, and it will not spin, I suggest you remove the motor, and check the ...

Bobby pin is stuck under agitator in a front load machine Removed agitator cover by taking out one screw buy pin is still stuck under paddle. you might have to take it off

...agitate I took the pump off & the coupler is broken. But I still cannot turn the agitator by hand. What might that be?? remove the agitator to see if there is a coin or bobby pin wedged

remove most items that are in there. Be prepared, though, because if there is anything "long" in there, like a bobby pin, it will not be easy at all to get out. If you can get everything out of there,

I think I have a bobby pin in my washer. It clicks when it agitates. How can I get into the drum to find if there is one? I doubt that it's a bobby pin. The noise more than likely comes from the belt.

...remove the drain pump. There was a half a bobby pin against the impeller and that stopped the turning. Took the bobby pin out and put it all back together. It works like a charm now. Very nice system ...

...REMOVE IT AND 4 SCREWS LATER ITS APART, I BET IT HAS A BOBBY PIN IN IT... GOOOD LUCK! Please check on the link below for tips to replace the pump or clean it: ...

machine back panel At the back of the appliance you can also access the pump, if you remove the two hoses you can check if something is stuck inside the pump. access the drain pump from the rear panel

...inlet to the pump was blocked with change, bobby pins, small rocks, pieces of fuzz and clothing. Removed the front cover of the mahine and removed the cap on the front side of the pump and cleaned ...

...out You need to post the make and model number. But if the filter is sticking then you may have to remove the hoses and clamps and screws that hold the housing and take the whole thing out. I have ...