Question about Whirlpool Washing Machines
...filter if the lid wont open! (i have followed the instructions on the manual too!). Please help! I dont want to call a technician - they are so expensive! Could you double check that model number for ...
Question about Estate Washing Machines
...it i accidently punched a hole in it and now the water wont shut off when it starts adgitating You need to replace the water filter as it is damaged.Please fit in the same type and
Question about Hoover Washing Machines
...wont cycle either I have removed the pipes from the filter and found a plastic badge lodged in the pipe. Ive move this but now it wont seem to follow any cycle at all. The soap dispenser tray and lid ...
wont stop spinning for some reason any ideas what is wrong Very likely that the filter is blocked. Because the machine senses there is still water present it carries on spinning but the blocked filter
...filter Machine wont spin as the water does not empty, cant seem to find the filter to see if it has blockage. Remove 3 screws from the bottom front service panel. Pull the panel down...then off. The ...
...wont drain...what can I do? Check your exit hose spigot, it may be clogged. This is if your filter is all clean. (consult your manual to know where/how filter is cleaned). There should be air for ...
Question about Hotpoint Washing Machines
...wont drain the water i am qiute sure its the filter which is blocked can you please tell me how i can remove the filter safely as do not want to do any damage, i think the filter is at the bottom ...
...then it wont allow the spin cycle to start. Locate the filter (probably behind a little door at the botton of the front of the machine). Remove, clean and remove the debris, re-fit and all will be ...
...wont spin lid must be closed for spin also Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose ...
...wont empty it is full of water when thewash is over help please Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe ...
174 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
650 Questions
256 Questions