Question about Washing Machines
...Washing Machine Replacing the wash cycle selector knob on an Ariston AV 105 washing machine can be done with the following steps: Turn off the washing machine and unplug it from the power source. ...
Question about Hoover Washing Machines
...washing machine DYN9164DPG I assumed it would pull off but seems not the case, I need to replace the selector switch To remove the program selector knob from a Hoover washing machine DYN9164DPG, ...
Question about General Electric Washing Machines
selector to be pushed off the timer shaft and you can no longer operate the machine. VERY IMPORTANT: Stop using the on/off knob to set the wash cycle. Press on the cycle selector to set the wash cycle
...washing machine Hello. My kenmore elite washing machine only works if apply side pressure with my fingers on the Selector switch knob . I am able to do a full load that way, but as soon as let my ...
...washing machine, that set to any program it doesnt move on it just does that setting,then if you turn the machine off and set it to end program you can reset to rinse and the proceeds to drain then ...
...selector inner knob counterclockwise. The outer ring will then pull off. The other knobs are held on with friction and should just pull off. The best way to get behind the front panel is by removing ...
Question about Whirlpool Washing Machines
...washing machine cycle selector/start/off knob must be removed. The Dryer knobs simply pull off. However, the washer cycle selection/start-stop knob doesn't seem to be a pull of knob. How can I remove ...
...selector knob continues to turn COULD BE THE SPLINES ON THE SPINDLE PULL KNOB OF AND SEE IF CRACKED OR THE SPLINDES WORN ON INSIDE OF KNOB .IF OK THE SELECTOR NEEDS REPLACING. HOPE THIS HELPS ...
...washing machine in a pre-determined pattern. It provides the electricity to all of the washing machine components at the correct time and for the correct length of time. The Start switch is usually ...
selector knob turns very fast and the wash goes from the fill mode to the drain mode and does not wash or spin. the problem is with the selector.behind this,ther is a wheel with teeth.one of the teeth
1,216 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
650 Questions
256 Questions
168 Questions