Question about Kenmore Kitchen Ranges
...oven door is locked. While baking, my son Kenmore 75565 gas oven door is locked. While baking, my son locked the oven door. Now the oven door will not unlock. Gas oven, but turned the breaker off. ...
Question about GE Kitchen Ranges
door flashing can't use oven During baking, F3 starts flashing at times so oven won't work. Now during baking, Locked Door message showed up, so oven won't work, has been flashing 24 hours now. I have
...oven when I was putting in a cookie sheet. The "bake" light went off, and the "locked" indicator began to flash. However, the door was not closed and the latch is in the out or locked position. The ...
Question about Maytag Kitchen Ranges
...BAKE is pressed. Hello. It sounds like the door switch is shorted and telling the main board that the door is still locked. This will prevent the oven from functioning properly. The door switch part ...
...oven to bake or broil, the top of the range gets hot - hotter than it used to. It is almost too warm to the touch, as if I burned through the insuluation. I have not put the oven through the ...
bake food, the oven door locked and the temperature rose to it's maximum - the panel indicated that it was in bake mode and set at 375 degrees. Even after unplugging the oven for 1 hour (several times
bake an item, so I preheated the oven and started to cook item when all of a sudden an error code came up and stopped the oven from baking any longer. THE CODE( F95 ERR) came up and shut the oven down
Question about Kitchen Ranges
...BAKE POTATOES IN THE OVEN AND WHEN SHE PUSHED THE BUTTON TO PRE HEAT, THE OVEN DOOR LOCKED LIKE IT WAS GOING TO CLEAN. STOVE IS GAS,SUPER CAPACITY 465, MODEL 385PEGT, SERIAL RK3910030. I HAVE TRIED ...
Question about KitchenAid Kitchen Ranges
...oven door locked and closed during and soon after the high-temperature cleaning cycle, which can be approximately three hours. The door stays locked to prevent burn injuries. You can open the oven ...
137 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: