Question about Dynex Televison & Video
...go back to TV mode just keeps up with the run auto scan box Main system control memory IC fault. Check and replace it. If you wish to get some details; check the site linked here. Pull up older ...
...same result. Please help. If you have a cable box attached to the tv, check the "aspect ratio" on the cable box. there should be a button on the remote for the cable box. this may solve your
same results, unplugged, held power off 30 seconds, same results. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com
Question about Televison & Video
...LCD TV. Having problems get all channels wanted. Have autoscanned SEVERAL times but no results. Check and replace its tuner. If you wish to get some details; check the site linked here. Pull up ...
...the power supply board, it has fuses on it, it can easily be fixed just take the back panel off and check with a multimeter, if good then the board is bad, the last two i replaced cost 200- 250 ...
Question about Westinghouse Electric Televison & Video
Model LD4655VX just stopped working in the middle of watching. Can't get it to power up Checked the power source it was warm to the touch when it cut off. checked all connections no positive results ...
...result. Only difference is in the T-Con board. The T-Con came from ShopJimmy.Com. Is it possible that I still have a bad T-Con board? Please can someone help me? This TV is about 16 months old and ...
...Check to see if you do have at least the 5vdc standby voltage. Parts: http://www.shopjimmy.com/catalogsearch/result/?q=Polaroid+TDA-03211C+ http://s807.photobucket.com/home/budm/allalbums ...
Question about Televison & Video
...at all,no standby Hi,my LG 26LB75 displays nothing at all,no standby light even, it's dead.I have checked the fuse in the plug thats ok, any ideas.Dont know if there is an internal fuse.Prior to ...
Question about Televison & Video
...constantly running. Did hard reset with no results. Main system control memory IC [EEPROM] fault. Check and replace it. If you wish to get some details; check the site linked here. Pull up older ...
4 questions posted
Usually answered in minutes!
2 Questions