...top and bottom of the picture. Your choice depends on the material and your personal preference. Now, if you know you are looking at wide screen material, you need to correct a setting in the view ...
...top and bottom screws, then the middle inner screw, and finally the top and bottom inner screws, using the threadlocker on all 6 screws. Verify that all screws are tight. 6) Reassembly Reassembly is ...
Question about Philips Televison & Video
...bottom of the panel that holds it together with a box for cables. At this point the main panel will be lose 4. Carefully start lifting the panel. You will see that there are connectors going from ...
bottom. Replace and replace ALL of the caps on the upper left side of the board. It's OK to replace with a higher value Voltage, they must be the same uf value of equal or higher voltage. They must be
...top of the power supply and one main power input at the bottom. The main power input may have some glue securing it in place. Simply cut this with a knife or pull it loose. Once you have the cables ...
Question about Philips Televison & Video
...bottom and top of metal box 10. 1 wire connector at top of box I left connected 11. Flip metal box over towards top of Tv. Be careful of wire at top thats still connected. 12. On left side in box is ...
45 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions