Krups KM7000 "repair heating pressing iron" Questions

...heating element and the switch build in a heatshrink or just as it is (how its look like) always good to know why that thermalfuse could be broken, that if it give no resist to show if measured that ...

...pressing the steam button. Within a minute or so the required pressure is built up. In case of some coffe machines, especially in the automatic and semiautomatic machine types, there is provided a ...

...iron, re-heat and re-solder them. Applying some flux will also help make your solder flow well with existing solder, which may be of a different type. Look carefully at all these connections with a ...

...repair man is wrong. Let me explain. If you are getting steam at all, then your pump is not broken. This is the way it works, you have water in your machine, it goes into a area where it heats the ...

repair this error but it seem everyone had different solutions. I opened up the unit to try to see what could be wrong with it. 1. Check if the metal springs are even. Try to bend them up more so they