Zapco I-450 IFORCE SERIES 4 CHANNEL CAR AMPLIFIER UK Car Audio Amplifier "channels 2 13" Questions

...Watts T.H.D. : <0.3% Frequency Response: 10 - 25KHz S/N Ratio: >90dB Channel Separation: >50dB Dimensions: 13"L x 9.9"W x 2.25"H Zapco I450 Zapco I 450 iForce Series 4 Ch. 360 Watt ...

...2)Take the other end of the jack and plug it into a line in of one of the spare channels (lets say channel 13 ok?). 3) Take another direct out (same first click thing) from channel 13. 4)Take the ...

...>105dB (IHF-A Weighted, at 1kHz)Dimensions: 10-3/8" x 2-1/2" x 13-5/8"Hope that helps. Your amp can't handle 2 ohms bridged only 4 ohms bridged so just keep it on one channel and it should be ...

...2 Channels Continuous Power @ 4 Ohm: 125W x 2 Continuous Power @ 2 Ohm: 190W x 2 Continuous Power Bridged @ 4 Ohm: 380W x 1 Frequency Response: 10Hz-50kHz THD (1kHz, 4 Ohm): <0.015% Signal to Noise ...

...13" w 7 sub to my jl audio 1000/1 amp the best way? hmm. i would start off with some wire. Keep in mind that you will need to separate the positive (usually red or has a stripe or marking on it) from ...

...2 Install your new speakers. Start by removing the paneling of the speaker enclosure. Unscrew and disconnect the old speaker. Ideally the speaker wire will be connected to the old speakers with a ...