HP Deskjet F4180 All-in-One InkJet Printer "cut right side document" Questions

...cut off on the left hand side of the paper. currently our computer tecks adjusted my margins on my computer but now the printing is to the right and it is very small printer tiflon is damage please ...

right side of the document, or cuts it off and then prints what it cut off on another page. This is only happening in Office documents, Word and Access to be exact. I've checked margin settings and it

...right side of the image gets cut off. Any suggestions would be greatly appreciated! I would make sure that the paper guides in the paper tray are tight against the paper. And make sure the adf guides ...

right margin too wide. The document will print out fine on other printers, but it is off about 4 letters to the left on the T610. Sometimes the document size is such that print or graphics on the left

right hand sides of the page. Whilst your software may allow you to work with a zero margin, your printer is physically incapable of printing in the non-printable area and will simply cut-off any text

...side sometimes cutting off the top of the document. Firstly check are the left i right holder in paper tray in their position accordingly formats eg A4. Then very well clean, if necesarry replace, ...

cut and pasted from the Ricoh manual, which as any tech will tell you is worthless. There is some other setting that must be set to force the "TIFF/JPG" to toggle - hence why no one has figured it out

...right side gears of the carousel. When removed you have to clean the glue residue off the "L" arm. You will also have to put another pad on the "L" arm otherwise the arm becomes magnetized which will ...

...side of the page. It prints my documents perfectly. What's the matter? I found that the print margins on my browser were set incorrectly--four inches in on the right. I don't know how they got that ...

...cut off on the right side. The only solution I have is to manually increase the margin size in "page setup" before I print. Is there something wrong with my printer or the software?? Thanks so much. ...