Canon PIXMA MX700 All-In-One InkJet Printer "back off" Questions

If this fails, then Power off the printer completely. Pull the plug if that's what it takes, but power off and then back off. Put paper back in the feeder and try again. This should clear the problem

...back on Do service reset: turn off your printer, unplug power cord, press ON/OFF button 5 times, plug power cord back in and turn on printer If this was helpful, please take time to rate my answer

...off the printer and power it back on. Before powering back on the printer, wait five to ten minutes. On the operator panel, press the button. (The display will go blank.) Note: On rare occasions, it ...

showing ink empty when not switch printer off. switch pc off, switch pc back on (you have now rebooted pc),when home page appears switch printer back on,good luck

...off and back on - no change. The cartridges were Canon. Sue Hi there Take out the inks and leave out then swich off the printer with the inks off and then turn on put back the inks again worth a ...

...back n forth has come off. Sorry im not very techy but il do my best. I had just installed new ink and as the cartridges were moving back into position there was a click and the rubber "chain" that ...

...off and back on. In other cases: Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not ...

...the printer cable from the printer, turn the printer off, and then unplug the printer from the power supply. Plug the printer back in and turn the printer back on after leaving it for a

...back on. Run some of the stand-alone tests if there are any on board the printer. The turn the printer off and reconnect the cable. Turn the printer back on again and let me know what happens.

back in 3 times. i have also switched off the printer and restarted it after each time i put them back in Hold down the OK or Stop/Reset or On/Off button for a few seconds to reset the new ink levels.