Frigidaire FRS26ZSG "ice arm stay" Questions

...need to be replaced. It is possible that the metal arm has become disengaged and could be installed? Refrigerator Repair Replacing the Ice Maker Shut Off Arm Whirlpool Part... Hope this has

maker The wire arm that travels up ad down when it dumps ice. Lift the arm to the horizontal position and it should stay there. The ice maker is now off. Push the arm back down and the ice maker is on

ice maker. If the wire arm drops back down, lift it a little higher until it stays up. If you are going to move the fridge, make sure the water hose in back of the fridge is turned off and disconected

...arm of the ice maker and make sure that it is down and not blocked by any ice cubes. If it's raised, it has turned the ice maker off. This arm needs to be in the lowered position to activate the ...

...arm in the ice maker is down. Even though the ice maker does not have the water hooked up if the arm above the ice bin is down it will still cycle the ice maker try lifting up the arm it should stay ...

The arm on my ice maker stays in the off position and when I turn off the power to the ice maker and let it melt I still can't move the arm back down Your ice maker is bad replace it.

...Is there supposed to be a arm on the ice maker ? Yes, it needs some way to know when you have enough ice. When the arm is all the way up to a place where it stays, it turns the ice maker

Ice Maker arm is locked in upright position, will not go down therefore it wont fill tray. When test button is pressed the arm will rotate down when it turns the tray but then gets stuck in the up ...

arm stays down, seems pushed down by ice I'd turn the ice maker off till the bin is low enough to get the arm free. Then watch how it behaves until the problem is sorted out. There should be a turnoff

...ice is coming out. The arm feels loose now and will go up and stay in the "off" position and will allow you to release it to the "on" position. What damage did I do by forcing the arm down and what ...