...square hole below the ice maker. This rod runs the flap on the dispensor and keeps it closed for crushed ice and opens the flap for cubed ice. The is a plastic bar inside the little square hole that ...
square , white , plastic "gate" . Asolenoid with a plunger , raises this gate for cubed ice and keeps it lowerer for crushed ice . Usually this "gate" plunger , rusts , thereby replaceing the solenoid
ice cubes coming with square edges... Purchased a GE side by side refrigerator and the ice cubes have sharp edges..I have had the repairmen out several times and they indicate the ice maker is working
...ice flap successfully slides into the square opening at the back. If it can't slide in above the cork-raised plastic piece, you may need to pull the cork back out and trim a little more off it. This ...
Question about Maytag Refrigerators
there's a solenoid in the back of the freezer that switches the ice bucket from cubed to crushed. You'll see the rod in the ice bucket slides into a square hole that moves up and down. That's it there
...ice bin look at small square opening reach in with your finger and pull down on vertical rod if it doesn't come down you'll have to remove complete auger asm from freezer (remove 2 1/4 screws and ...
Question about Hotpoint Refrigerators
...square ahnger then give your refrigerator a "reach around" and cycle the ice dispenser in both the crushed and the cube settings. in one of the settings the square should move. if it does not.... try ...
...ice bucket. Against the back freezer wall, you will see a square opening with either a white or clear switch that can be adjusted up to down. If you have a blow dryer, blow dry the square opening for ...
...ice bin . Press the door switch in , and press the dispensor actuator pad . In the back , on the panel with the prongs , there is a square box cut-out , which houses a white square plastic piece . If ...
...ice shelf, you will see a small square hole. This is what changes it from crushed to cubed. It is an actuator that moves the rod to allow cubes to come out. Stick a screwdriver into the square hole ...
40 questions posted
Usually answered in minutes!
750 Questions
598 Questions
459 Questions
272 Questions
173 Questions