Peavey AMPLIFIER, 1000 WPC, DDT, 8/4/2 OHMS => Model PV2000 Car Audio Amplifier "input jack bass amp" Questions

input stage, amongst many other things and possibly damage the amplifier too. The bias (Bass, Mid, Treble controls) are on the mixer, not the amplifier. Unless you are using a mixer amp, which you are

...jack coming out of my cd player for subwoofer. but have two rca inputs in the lightning amp? just use one? or do i buy a "y" adapter? if you only use the white or the red then you won't have the ...

...bass fades away and voice gets distorted only at left chanel. what could be the problem. please help ? Have the speaker checked out and if it checks good you need to take the amp back to the repair ...

bass components, you can turn it on separate from the rest of the car and allow it to charge before you start your car (just be careful to turn it off when you are going to be away from your car for a

jack to my phone and the amp is still turning on and off when the gain is turned up 1) Pull your speaker wires, grab an ohm meter and confirm that each speaker reads 4-8 ohms nominal impedence. 2) Ohm

input wiring harnesses)    Line Level RCA Inputs: Front and rear, left and right female preamp level inputs    +BATT (+12V): Gold-plated screw terminal, 0.350" wide 

...INPUT LEVEL, SUBSONIC FILTER, BASS BOOST, and LOW PASS FILTER; midrange. PHASE SHIFT "0" (left). Leave the remote level control disconnected. After you've checked all wiring and initially set the ...

...input jack. If I hook the high level input up while the head unit is playing the system works for as long as I have it turned on. Strong bass, no over heating, etc. I'm starting to tire of having to ...

...bass output is very low when i tap on the top of the amp it bumps for a split seconed and then stops usually when i tap on the side with the speaker outputs Check the connections to the amplifier. ...