Panasonic TH-42PZ700U 42 in. Plasma Television "repair dg board" Questions

...It's related to some internal board failures. It could be the power supply board, or DG board, or even H board. If your tv is still covered by warranty, just drop it to warranty depot shop to

...DG board will need to be replaced. If you dont have any repair skills I would recommend you to take you TV to a repair shop since this is complex repair I just bought a Panasonic TX-PF37X10 Plasma it ...

DG board or even H board. If still in warranty, send to warranty depot shop to repair. i have the same problem The blinks are a failure code indicating that some component in your tv isn't functioning

...DG-PCB replaced and still no luck. I am exchanging for another one. The service guys want to take it with them, but would provide a loaner. Need to return this within the next two weeks to get an ...

...standby voltage from the DG has an issue and is preventing the set from powering up. Replacing the DG would be the recomended repair for that issue. You can get the DG board from ...

...that says PC full and then it goes to no signal message...and ideas...lol You will need to trouble shoot the set, if the DG board didnt repair the issue. Do you have the service manual for your

...switching into standby displaying flashing leds It could be due to the power supply board or DG board or even H board failure. If it's in warranty, just drop to the warranty depot shop to

...guy said I was the DG board (Main Board) what do you think about that? It may be time to either give up or have a shop look at it--guessing which board is bad, buying and installing it can be

...repair? 10 blinks Sub 5v SOS / Main 3v SOS DG Board DTV 9v SOS / Tuner Power SOS.These are the faulty boards and sections to be checked.  Just visit the site named 'Electro-help'. ...

...DG Board DTV 9v SOS / Tuner Power SOS.  You must ahve through knowledge in electronics to detect the exact faulty board and to repair this set.  If you are not sound enough in electronics, ...