Onkyo TX-SR605 Receiver "speakers connections" Questions

...connections is for additional speakers like surrounds to be able to be connected directly to the sub woofer speaker level out for sound. This of course would be for an older receiver connection. I do ...

how do i connect 4ohm speakers to my 8ohm jvc receiver You must connect two sets of speakers to do this. You must connect them in series. Meaning, you connect the positive of one to the positive (red)

When I hook up the rear speakers to my in-wall speakers, I can't get any sound. I have speaker button 1 and 2 selected. Hi: you need to clear that you connect wall speakers for font,center or rear ...

Denon AVR-3802 Power cuts out and standby light blinks when connected to speakers. Works fine with headphones. Suggestions? I have repaired many of these Denon receivers over the last few years. Since

...speakers. Connect the speaker wire that is labeled "Right" to the receiver's left speaker connections only then turn your receiver on. IF the loud noise comes back, this speaker is damaged. I am ...

...40-244 radio shack Dear fellow stereo fans: First, you connect the wires which would go to your speakers in th respective speaker a or speaker b out. Second, connect one pair of wires from the ...

...connections or speakers is faulty. From here add one speaker at a time (always with the device turned off when you plug each speaker in) until you find the offending connection. If it not a speaker ...

speakers to connections at any time!!!!!!!!!!! ONLY ONE can be applied to EACH OUTPUT TERMINAL!!!!!! If the speakers your using are fuse protected check fuses or circuit breakers accordingly. One open

...the speaker balance and connections. Look for a "Test" button. Beside swapping the speaker connections left to right swap the speakers between the A and B speakers. See image for connection