Question about Kenmore Microwave Ovens
...start button stopped working. every other button works fine. when i reset the power, it asks me to set clock and when i was setting clock, i presses start button and it worked fine but for using ...
Question about Microwave Ovens
...button it does not work holding the stop / clear button for 5 seconds or the start button for 5 seconds usually works, see this link ...
...Start Button Not Working First the ''opener'' button started sticking a little bit when pressed, now the start button no longer works. Any advice on where to start? This may not solve your problem, ...
Question about Microwave Ovens
...and start button is not working Sometimes the reason for the start button on your microwave not working ... But first, try holding the off/clear button on the keypad for 5 seconds for a soft
Question about Frigidaire Microwave Ovens
burned out or do we need to replace the whole thing? Power seems to be going to the other buttons, just can't make it actually cook once the selection has been made Does it have a start button
...start button . It started Then made an arking noise. It now makes a Buzzing noise if you turn it on . Have not used after it happened. Thanks Wayne mmv5207ba/bc microwave 0 button fan on button does ...
...work. Start, stop, 8,9,and 0 buttons do not work on microwave oven touch pad Hi, welcome to Fixya!From your question, I suspect the fault is from the control board of the microwave. This is why some ...
Question about Whirlpool Microwave Ovens
...start press 6 or higher (not programmed buttons) because the lower numbers will not work. You must dismantle the circuit board and check if some grease vapours between touch buttons and the the ...
Question about Sanyo Microwave Ovens
...Start button does not work EM-G5596V - Start button does not respond.All other buttons are working fine. MY KIDS WERE USING THE SHARP MICROWAVE R-9H94B FOR A TIMER WITH NO FOOD IN IT. IT NOW DOES NOT ...
Question about Microwave Ovens
start button does not work on whirlpool microwave: all other buttons work but will not start i am using the "quick start" button to turn it on. I cannot use any other options because the start button ...
100 questions posted
Usually answered in minutes!
37 Questions
18 Questions
15 Questions
12 Questions
20 Questions