Frigidaire 30 in. Electric Gallery Series Self-Cleaning Double Wall Oven "door lock keep unlocking" Questions

...unlocking the door. Pressing CLEAR has no effect. If I press the SELF CLEAN button, then START, it looks like a clean cycle is starting, but it really isn't. The door keeps on locking and unlocking, ...

...door switch might have got stuck in locked position, or broken in locked position (to be replaced), let's hope it's just stuck...which you'll need to work the mechanical lock-unlock latching back and ...

lock and unlock switch. So I opened up the oven door and found a latch at the top and pushed it to the right, which then ''locked'' the door. The auto clean worked, but my door is still ''locked'' and

door message".... not lock, which meant that it would not do the self-cleaning cycle. How to Unlock a GE Oven: 9 Steps (with Pictures) - wikiHow www.wikihow.com > ... > Microwave Ovens wikiHowThe self

...door to the oven with the metal receivers in the slots on the oven. Once the receivers are in the slot, fully open the door (in a downward position). Flip the U shaped pieces over to lock the

...door lock switch hello dennis, this is what i found in the manual; ?LOCK DOOR? flashes The self-clean cycle has in the display been selected but the door is not closed.? solution: close the oven door ...

...lock on the door locks and unlocks and after about 30 secs reads E1 F5. I tried to use muscle and hold the door in tight but still didn't work. Also tried holding door out to try to keep the door ...

...but will not unlock. It also flashes ''Door locked'' in the control panel. Do I need to replace the lock or is it the front control panel?Or both? You will probably have to replace the door

...door have a GE oven with self cleaning. the lock selinoid that keeps you from unlocking the door during high temps and self cleaning had a melt down literally. removed back cover to get to selinoid ...

...door lock mechanism. If you remove the rear panel and locate the lock mechanism (about middle of back) and HELP the gear turn a little it may finish it's unlock cycle. If not just keep turning the ...