LG WM2455 Front Load Washer "wont without unplugging" Questions

...wont turn on or off not working but when you unplug it and plug back in the washer comes on. How do I fix this? I am having same problem- power button will not operate at all. If I open the door and ...

...wont drain I checked and cleared all of the drainage tubes and it still is doing the same thing If what you have done did not solve your problem, you will have to replace the drain pump motor. It can ...

wont turn on, if I unplug it from the wall and plug it back in, it will work for one cycle, but then the next time I go to use it, I have to unplug it again to get it to work. Click the link below :--

wont open or close. I can hear the latch moving inside but nothing will happen. The "Door Locked" light start flashing. Any ideas, thoughts now how to fix this? I just bought this . Hello, A

...wont spin. Removed the heavy jacket that was there and tried running it without any clothes, but still will not work This is usually a communication error, unplug the machine for 20 minutes and then ...

...wont. Sooner or later the LE error shows up in the screen and the unit stops trying to work. It seems like it doenst have to power to change the direction fo the unit. The drum rolls freely when not ...

...wont start, there is no audible bleeps, after trying to start the cycle after a few seconds all the temp lights and the option lights blink, a new door interlock switch has been fitted without ...

...wont cancel out and i cant power it off without unplugging it? i have changed both pumps and im lost please help. Sorry to read about your problem, I hope this helps you out. keep unplugged and call ...

...wont wash or spin What could be wrong? I did forget to set the machine back to LARGE load after doing a SMALLl load so I'm pretty sure the stress of washing without enough water caused this. Is it ...

...wont turn on wfs1275cd This could be the door switch unless it is totally without any power. First thing is to unplug it for a couple of minutes. Then try again. If that does not work, remove the ...