Eureka Altima Upright Vacuum Model 2996AVS Vacuum "not work" Questions

not work I went to use my vacuum and it will not work in the upright position, the brush bar will not rotate/work. It is not dirty with string arou nd it etc. could be that the bet has busted they are

...then would not work again, can't see any broken parts I would try for spares at a Dyson service ...

geepas service centre ernakulam my geepas tourch is not working, have your show room in malabar side I have geepass led torch that was not working any service centre in ernakulam i have geepas ...

Dyson v6 motorhead part not working. The beater bar does not spin round. The motor in the handle part is working ok. try this page out. http://www.dyson.com/support/dc58-dc59/dc59-motorhead/my-machine

...not work in carpet position. The light won't work and it isn't cleaning up hair on the carpet. By "does not work" do you mean the motor will not run or does it just not pick up properly? Depending on ...

work light not working on legend 2. bulb is ok work light on kirkby legend 2 is not working the bulb and holder are in good condition. don't know what the problem is orange wire from field is faulty

...not work. However it does work with the rug attachment but all the other attachment it does not work. I heard something large being picked up. What can I do? Is there any suction when the hose is ...

...not work the brush is not working the light does not come on, the reset button does not correct the problem, the belt is ok. If the motor works and the brush dosen't turn then I would check the belt ...

...is working but it is not picking up anything the suction is not working ? Remove the hose and clear any obstruction from inside of it. If that does not work check the bag and filter if one is ...

boot not working in f1 prees him key bord not working and in probleum is software os not working in system go to bios setting and find usb connect enable,or use ps2 key board.