Question about Dyson Vacuums
...brush button won't engage brushes Dyson dc25 off button won't turn off, brush button won't engage brushes Hi ... did u get this fixed cos mine is the same hve to switch off on the ...
...won't turn it is due to a bad turbine. Insert a screwdriver into the square hole that the pin on the brush fits into, and see if it turns. If it is seized up, the turbine assembly will need to be ...
...brush won't rotate The cordless Shark 15.6v works and picks up dirt but the motorized brush won't turn. I have removed all lint but can't find a tool to take out the screws (not normal ...
...won"t turn (1) Remove the brush block and assure the presence of the square drive pin on top of one brush. It should be about 1/4 inch square, two inches long to connect o the drive mechanism. (2) ...
won,t turn,belts were checked,power on ,vaccum tilted,brushes turn with no problem by hand? If belts are ok then possibly needs new front brush motor replaced. remove the lift off and assure the plugs
...a flat screwdriver into the square hole that the pin on the brush usually fits into. Try to turn the fitting. If it won't turn, the air driven turbine has seized up and will require
...brush won't turn when powered Bissell powerforce brush won't turn when powered on. Smells of slight burning rubber. Hose still has suction. removed bottom panel, belt is not broken, don't see ...
brush won't turn on my Panasonic MC-CB467 brush won't turn on my Panasonic MC-CB467 There should be a safety reset button. So like if you suck up a rug it will shut the power to the brush ...
Brush won't turn There is a good chance the belt is broken. The reason belts break is because the brush seizes up due to hair wrapping around tight at the ends of brush. Inspect closely with a ...
why won't my brushes turn why won't my brushes turn most likely stripped gears on the end of the brushes. (beltless model?)
204 questions posted
Usually answered in minutes!
154 Questions
86 Questions
80 Questions
71 Questions
49 Questions