Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum "clean surge button" Questions

Ad

Question about Hoover Vacuums

1 Answer

...clean surge is leaking. As soon as I fill liquid into vaccum cleaner, it leaks withing 2-3 minutes. It makes my whole carpet wet... Sangeet My machine leaked badly BUT it was my own fault. There is a ...

Ad

...clean surge button and the trigger button that was suggested by someone else but it won't I just bought a hoover steam vac model F5914900 and the clean water tank is leaking. I tried pressing the ...

Ad

...solution flowing but neither the regular button or the surge button shoots out cleaning spray...what now? it's probably the pump motor seized and needs oiling this video will give you

Question about Hoover Vacuums

1 Answer

...clean surge button until I heard a snap, I did just that many times and never did hear a snap so I thought it had likely happened and I didn't hear it so I proceeded to fill the solution tank and get ...

...Clean surge Button on Upper handle of the Hooover Steam Cleaner F5914-900 there is no "snap" indicating trigger rod is in place. Everything else went in as instructed. The screws and bolts ...

Question about Hoover Vacuums

1 Answer

... 1. Use the solution trigger on the underside of the handle (numbered 2 in the picture below) 2. For tough stains use the "Clean Surge" button to dispense extra shampoo (numbered 3 in the picture ...

...button to turn off the function. You may need to do it for a few times to get the hang of it. Third is to check for any blockages or clogs in the attachments. Look down through the tube and check to ...

Question about Hoover Vacuums

1 Answer

...clean surge so i borrowed this from my friend and didnt really know how to use it. i filled up the tank with the water and cleaner and pressed the button and cleaned the carpet, but there is no dirty ...

Question about Hoover Vacuums

1 Answer

clean my machine but i cant figure out how the clips inside the handle go on when the machine comes new the way it is installed is to put the upper handle on the lower handle, install the bolts & nuts

Question about Hoover Vacuums

1 Answer

Clean Surge button until you hear a snap, which puts the trigger rod in place. Skipping this step will cause the Clean Surge button to stay on all the time, and the steam cleaner will appear to have a

Not finding what you are looking for?
Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum Logo

615 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...