Bissell LITTLE green Compact Multi-Purpose Cleaner Vacuum "clean tanks machine" Questions

...machine by lifting the Tank carry Handle. 3. Carry like a bucket to the sink. Rotate the Handle forward to unlatch the lid. Lift off and set the lid aside. 4. Fill up the Bladder with clean hot tap ...

clean water tank and place it back on the machine. Release the machine handle and remove the cover of the "dirty" water tank. Inspect the back of the tank to be sure that the vacuum adapter in located

...machine and you will see a little red pump under the "clean solution" tank area. Remove the 2 screws and clamps holding it in and replace the pump. (Just do a Google search for "SPOTBOT Pump" until ...

...Clean the water tank first, following steps l-5: 1. Make sure the steam control knob is in the center off position and that the plug is disconnected from the electrical outlet. 2. If the machine is ...

clean water tank from the machine and then re-seat it back into the machine. Check for clogs: There could be clogs in the system that are preventing the water from dispensing. Check the pump motor: If

...clean water tank installed and the machine is not running then the pressure solenoid valve is stuck open. Mine did this and emptied the clean water within 30 seconds. Detergent side of the tank was ...

Clean the Lint Screen if necessary. - If the float flap door in the tank lid is activating prematurely when you turn the machine on, this flap door should be replaced. This tank may need to be emptied

...Clean the Lint Screen if necessary. - If the float flap door in the tank lid is activating prematurely when you turn the machine on, this flap door should be replaced. - Check the Tank Lid and Tank ...

Clean the Lint Screen if necessary. - If the float flap door in the tank lid is activating prematurely when you turn the machine on, this flap door should be replaced. This tank may need to be emptied

...tanks. - Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting. - Check for debris on spray tips. Clean them with a ...