...go fasger until I get to around where the tv turned on or off last time. his process works for most ddvices, some tvs may require pressing the ff button several hundred times to find the correct
...turn your TV to the HDMI channel, and at some point turn off the HD source device you are going to get a blank screen, you have to manually turn your TV back. In regard to whilst you are recording it ...
...turn the tv on and the green light flashes for about a minute, finally comes on with no picture, then takes repeatedly pushing power button on the tv to turn tv off. then push power, it comes on and ...
...turn on your TV or DVD player, it takes a while to show anything. If the time is less than a minute for a dvd player, or less than ten seconds for turning the TV on itself, then this actually ...
...that if I turn the tv off for a few hours, sometimes it will work again but most times it doesn't. The tv is only 9 months old. either a dirty optical pickup (reads the discs) or a bad
...TV. I would turn the DVD player on but the screen for the DVD player wouldn't pop up, I would just have a black screen on my TV. After turning the DVD player on and off about 3-4 times it would ...
...tv screen says there is no disc. The only way I can turn it off is to pull out the plug at the wall. When it comes on it says `preparing' but then settles on the time and will not do anything. might ...
...outlet and turn on the TV. 5. Open the on-screen menu to confirm that the TV is responding again. 6. Turn off the TV and reconnect the devices. 7. Turn on the TV. Hope it may help you; Regards; ...
...TV and turn them off there. Sometimes merely muting and un-muting the TV is all it takes. Other times, you have to go into the settings. Check your television settings and make sure closed captioning ...
15 questions posted
Usually answered in minutes!
126 Questions
84 Questions
78 Questions
63 Questions
55 Questions