Lexmark Z1420 InkJet Photo Printer "cut off" Questions

...cut off at the end if I want to print one by one. If I am printing a stream of labels then the end one gets cut off. Could you please help me resolve this issue. Thank you. Check in your driver ...

off position stop the gap on the wrong spot and wen you cut the label, left some label with glue expose, and wen you send other print, the printer make the backfeed and the label go stuck on the white

...cut the ribbon off. If you do this please be VERY CAREFUL and, as you get more and more ribbon off keep trying the "NORMAL" method. When you get down to the end make sure you don't cut so hard as to ...

Printer problem I have a Lexmark Z600. The printer works great but it cuts off part of the page when it prints. Please help. I have tried everything. Lamby Sounds like a format issue, try setting your

...off center attempting to print pages from email, printed section starts about 4in from the left and cuts off the information when it gets to the right side of the page. Try uninstalling the printer ...

...cut off and does not print all of documents....what to do? Ok your problems are settings related.. I advise you to go to the following "How To" and ya should be good to go. ...

cut through the bar code, but instead the lines are cutting through the other information making it impossible to read. thanks for any help. The lines(voids) are being caused by elements that are worn

cut off the information on the left side. Also how can I adjust the label so that it will print correctly from the top. We are using this printer to generate ISBT blood bag labes THe zebra must be set

cut off and i can 39 t print and i get a co How can it get my printer to cut off and get it to print Unplug the printer from the power source.  Press and hold the power button for sixty seconds.&

hi i have problem with my zebra m4plus cuter the cutter shield bloc the paper win i use cutting mode . i need tray use the printer without cutter shield !!!!! plz help me select the TEAR OFF mode on ...